SONAX Profiline Ceramic Coating CC Evo
Part Number: 237941
Surface: Paintwork
Function: Protect
As an Amazon Associate, we may earn a small commission at no extra cost to you.
PRODUCT DESCRIPTION
Introduction
From intense ultraviolet radiation that triggers cellular paint oxidation to corrosive industrial fallout, sandstorms, and highly alkaline road grime, your car paint is always under constant threat in the UAE. Using conversational paint protection may only give you temporary protection that will degrade after a couple of washes. But the SONAX Profiline Ceramic Coating CC Evo presents a different approach to protecting paint work. It comes in a pack that comes with two products; BaseCoat Evo, GlossCoat Evo, and four applicators.What the Product Does
The SONAX Profiline Ceramic Coating CC Evo protects your vehicle’s paintwork by protecting the paint work with an ultra-hard, glass-like barrier. The set is packaged to give you everything needed to completely protect your paint surface; the BaseCoat Evo creates a protective layer that protects the paint work, and the GlossCoat Evo creates a clear glossy appearance that gives your vehicle a new look. Also, you use the four applicators to apply each product evenly across the vehicle surface.Features
- Si-Carbon Technology Matrix: It utilises a strong silicon-carbon resin structure. This forms an exceptionally dense molecular network that creates a harder, more resilient barrier than traditional silicon dioxide.
- Broad-Spectrum Chemical Resilience: Once both products are applied properly, the coating exhibits remarkable resistance to aggressive chemicals. This prevents acidic environmental hazards from etching into delicate clear coats.
- Optically Pure Gloss Enhancement: It possesses a high refractive index that amplifies light reflection. It fills microscopic paint defects to create a flat surface, which intensifies colour depth and clarity.
Benefits
- Drastically Reduced Wash Times: The layer prevents road film, brake dust, and organic contaminants from sticking to the paintwork of the vehicle. This reduces your wash time significantly.
- Swirl and Scratch Mitigation: It adds a sacrificial layer of protection above the factory clear coat. The product gives an extra layer of hardness and acts as a shield against micro-marring and wash swirls.
- Maximum Resale Value Retention: A vehicle’s exterior condition is a major factor in valuing a car for resale in the UAE car market. Preventing permanent stains, etching, and paint fading maintains your vehicle’s aesthetic condition.
How to Use
- Prep the Panels: Polish the vehicle surface and wipe off all polish residue. This provides a completely bare surface for the coating to bind with.
- First Stage Application: First apply the GlossCoat Evo using the applicator that comes with the package. Apply the applicator first before rubbing across the paint surface of the vehicle.
- Second Stage Application: Leave to cure and clean off excess residue using a clean microfibre cloth. Afterwards, apply the BaseCoat Evo in the same way you applied the GlossCoat Evo.
- Execute the Cure: Park the vehicle in a closed, dry environment and allow it to cure untouched for at least 12 to 24hours. Do not use any shampoo when washing for the first week u start washing the vehicle.
Learn more about SONAX and how to detail your car in the best way on our Instagram page.
Complementary Products
Product Positioning / Comparison
|
Category |
Standard Natural Wax | Advanced Polymer Sealant | SONAX Profiline CC Evo |
|
Best For |
Casual enthusiasts seeking a quick, warm, deep gloss for car shows. | Daily drivers looking for cost-effective, easy-to-apply seasonal protection. | Professionals and owners demanding permanent, elite clear coat preservation. |
| Primary Composition | Organic Carnauba | Synthetic Polymers |
Si-Carbon Resin Matrix |
| Thickness & Hardness | Ultra-thin, soft layer | Thin flexible barrier |
Thick, crystalline shield |
|
UV Protection Level |
Low (Melts in high heat) | Moderate | Excellent (Thermal resistant) |
| Chemical Shielding | Poor against acids/alkalis | Fair chemical resistance |
Extreme resilient |
FAQ
Si-Carbon technology uses an organic-inorganic hybrid matrix that blends the hardness of quartz with flexible carbon atoms. It creates a coating that is less prone to water spotting and brittleness.
Yes, you can apply the rock chip touch-up paint. But you must give it adequate time to cure properly as factory touch-up requires about 2-4 weeks.
Reapply a small amount of fresh coating over the spot and wipe it level. If the area has cured, lightly polish just that exact spot and re-coat.
The complete pack consists of the BaseCoat Evo, BaseGloss Evo, and four applicators. This ensures you can complete a detailing job without stress.
No, it cures efficiently at ambient room temperature without the need for specialised baking equipment. This allows the vehicle to sit and dry in the garage overnight.
