SONAX Profiline EX 04:06 (1L)

Introduction

What the Product Does

Features

• Medium-Cut Abrasive Technology: It features a balanced abrasive system that provides effective removal of moderate paint defects. This makes it easy to eliminate swirl marks, light scratches, and sanding haze.
• High Gloss Finishing Capability: It delivers a high gloss finish all in one polishing stage. You don’t need a secondary refinement to improve surface clarity.
• P2000–P2500 Sanding Mark Removal: It removes sanding marks within the P2000–P2500 range depending on pad choice and technique. This bridges heavy compounding and final finishing.
• Silicone-Free Composition: The formula is free from silicone, ensuring its compatibility with body shop environments. Repainting processes can be done without any fear of contamination from silicone residue. 
• Multi-Stage System Integration: It is made to integrate seamlessly between heavy-cut and finishing polishes. This makes polishing work more efficient.

Benefits

• Combined Correction and Finishing: It removes moderate defects while simultaneously improving surface gloss. You don’t need to spend more time doing multiple polishing steps as it can be done in one step.
• Improved Paint Clarity: It levels surface defects effectively, resulting in clearer reflections. This boosts paint depth and visual reflections.
• Cleaner Working Environment: It has a low-dust mechanism that helps reduce dust accumulation during polishing. This keeps both the environment and paint surface a bit tidy and easier to clean up properly after polishing.
• Controlled Material Removal: Thanks to its cutting strength, the paint surface is not damaged nor is there excessive clear coat removal. This reduces the risk of over-polishing.

How to Use

• Pad Selection: Make use of a medium foam pad, as pad selection directly affects the final results. 
• Product Application: Shake properly and apply a small amount of the EX 04:06 onto the polishing pad. Distribute across the pad surface for consistent polishing contact. 
• Initial Correction Phase: The correction phase requires medium speed with moderate pressure. This is done to remove defects. 
• Refinement Phase: If you wish to perform a refinement Phase, the pressure should be slightly lower than used in the initial phase. This allows the abrasive to refine the surface and enhance gloss.
• Residue Removal: Wipe clean with a microfiber cloth after polishing to remove excess residue. Verify that the correction was done accurately at the stage and if you have to repeat any section.
• Final Finishing (Optional): Apply a finishing polish for maximum gloss refinement. This helps enhance the clarity and removes any micro-marring.