SONAX Hybrid Wool Pad for Dual Action (3 inch – 80mm) – 2 pcs

Introduction

What the Product Does

Benefits VS Features 

Benefits

• Removes Defects Faster with Less Effort: Its structure makes it a strong polishing tool that reduces correction time. Deep scratches, oxidation, and heavy swirls that frequently occur due to the harsh UAE climate can be corrected more quickly than with a standard foam pad.
• Generates Low Heat While Polishing: It maintains a safe working temperature that does not cause more damage to the paint. Its hybrid pad surface dispenses heat effectively, reducing the chances of burning or weakening the clear coat. 
• An Efficient First Stage Paint Correction Tool: Heavy cut stages are done quickly and the surface is prepared for refining without going through long, tedious processes. This makes two-step correction processes simpler and quicker.
• Excellent Control Dual Action Machines: You don’t need to switch to a rotary polisher, as you can achieve an aggressive cutting edge with the SONAX Hybrid Polishing Wool Pad for Dual Action (3 inch – 80mm) – 2 pcs.

Technical Features

• Hybrid Wool Construction: It is made out of lambswool and polyester materials. This makes it deliver high cutting power without sustaining much structural damage.
• High Abrasion: It is designed to provide the strong mechanical cutting action needed for removing deep defects and heavy paint damage.
• Low Heat Generation Design: Its fiber blend and structure reduce friction buildup and lower surface temperatures during polishing.
• 80mm Diameter (3-inch class): Its size makes it possible to fit a dual-action polisher while still maintaining the standards for a detailing machine.
• Dual Action (orbital) Machine Compatibility: The pad works specifically with FA polishers, making it safer to operate.
• Optimized for Heavy-Cut Compounds: Paired with an aggressive compound, you are sure of a maximum correction performance.

How to Use

1. Surface Preparation: The car surface should first be washed and dried properly to remove all forms of contaminants. Then make out all deep scratches, swirl marks, and oxidized areas using good lighting. 
2. Attach Pad Correctly: Get a rotary machine or DA polisher and secure the pad onto it. Place at the center to prevent vibration and uneven polishing.
3. Prime the Pad: Apply a thin layer of compound evenly across the face of the pad. It prevents dry buffing and ensures consistent cutting. 
4. Start at Low Speed: Place the pad flat on the affected surface and start the machine at low speed (1-2 speed) to polish evenly. Increase gradually to 4-5 and apply light to moderate pressure, then reduce on final passes. Work in small groups. sections of about 40×40 cm and use a slow speed to control arm movement effectively.
5. Monitor Heat and Performance: Check surface temperature regularly by stopping the machine when an area feels too hot and allowing it to cool off before continuing.
6. Wipe and Inspect: After a brief period of time, stop the machine, wipe off the surface using a clean microfiber towel, and inspect the area to confirm that the defect is gone.
7. Clean the Pad During Use: Blow out or brush the pad after each section and add 2-4 small drops of compound onto the pad and dab to distribute evenly. This should be respected after polishing each affected section. It prevents the pad from drying out and excess heat. 
8. After Use Maintenance: Wash with warm water, air dry completely, and store in a clean dust-free area.